Vacuum Flow

・Blow and vacuum can be performed by supplying compressed air.
　Blow: Max. 6820 L/min (ANR)∗1
　Vacuum: Max. 5270 L/min (ANR)∗1
　∗1 Values for the ZHV40 when the supply pressure is 0.5 MPa
・It is possible to adjust the blow and vacuum flow rate by adjusting the
　nozzle position!
・A vacuum flow rate 3 times or more the supply air
・A blow flow rate 4 times or more the supply air
・Weight: Max. 50% reduction (209 g ← 417 g) ∗2
　∗2 ZHV20, in comparison with product (ZH20-X185)
・Volume: Max. 50% reduction (17000 mm3 ← 34000 mm3) ∗3
　∗3 ZHV10, in comparison with product (ZH10-X185)
・In terms of body mounting, port connection, and passage diameter, this
　product is compatible with the product (ZH-X185).

・By supplying compressed air, large blow and vacuum flow rates are available.
・A blow flow rate 4 times the supply air
・A vacuum flow rate 3 times the supply air
・Large passage diameter available for the suction of machining chips, particles, etc.
・Maintenance-free
・Mounting brackets are available.
・Application examples:
　Blow: Blowing away water droplets and machining chips
　Vacuum: Vacuuming smoke during soldering, Transferring materials such as pellets or fine particles

・By supplying compressed air, large blow and vacuum flow rates are available.
　Blow: Max. 1550 L/min (ANR)
　Vacuum: Max. 880 L/min (ANR)
・Application examples
　Adsorption transfer, coolant blow to blow off cutting chips, adsorption transfer