Speed Controllers for General Purposes

・Easy to lock push-lock type
・Larger knob
・Improved tube insertion/removal
　Insertion force: Max. 30% (8 N) reduction
　Removal force: Max. 20% (5 N) reduction*
　* Tube removal strength is ensured to be equivalent to the previous model.
・Electroless nickel plated type is standard.
・360° swivel piping is possible. (Universal type)
・Available with a restrictor (Made to order: -X214, -X21)
・Large flow type (-X778)

・Height 12.7 mm, Height: 9.7 mm shorter (43.3% reduction)
　Possible to adjust flow rate even in a narrow space
　Easily mounted using a hexagon wrench
・Minimum operating pressure: 0.05 MPa
・Easy to use push-lock type
・Easier and consistent flow setting

・Height: Max. 20.8 mm shorter
・Flow rate can be controlled numerically with the indicator window.
　Due to the vernier indication, it is possible to configure fine settings in 1/4
　increments.
　Reduces work-hours and setting mistakes
・Mounting stud is available on the left side or the right side.

・The numerical indication of knob rotations for flow rate reduces flow setting time and setting errors. The value can be controlled with the indicator window. ・Larger push-lock type knob ・Improved reproducibility of flow rate ・Easier to insert and remove tubes ・Electroless nickel plated type is standard. ・Available with a restrictor (Made to order: -X214, -X21)

・Available with a restrictor (Made to order: -X214, -X21)

・Can be mounted directly to One-touch fittings
・Since there is no need for tools, mounting time can be reduced.

・Reduces labor time
　Easy to use push-lock type
　Knob O.D.: Almost doubled
・Improved reproducibility of flow rate
・Lightweight: Weight reduced by approx. 27%
・Electroless nickel plated type is standard.

・4 types of mounting variations: Direct mounting, L-bracket mounting,
　DIN rail mounting, Holder mounting
・With index plate
・Lightweight: Weight reduced by 30% compared with the existing product
　(AS2002F-04)
・Available with a restrictor (Made to order: -X214, -X21)

・The numerical indication of knob rotations for flow rate reduces flow setting
time and setting errors.
　Flow rate can be controlled numerically with the indicator window.
　4 indicator window directions are available.
・Larger push-lock type knob
・Improved reproducibility of flow rate
・Electroless nickel plated type is standard.

・Height: Max. 5.4 mm shorter
・Flow rate can be controlled numerically with the indicator window.
　Due to the vernier indication, it is
possible to configure fine settings in 　1/4 increments.
　Reduces work-hours and setting mistakes Product Number Check

・Height: Max. 5.5 mm shorter
・Flow rate can be controlled numerically with the indicator window.
　Due to the vernier indication, it is possible to configure fine settings in 1/4 　increments.
　Reduces work-hours and setting mistakes
・Better visibility
　Check from 360° directions is possible.
　Inspection and maintenance works are facilitated.

・Panel mount thickness: 35 mm at the maximum
・Available with a restrictor (Made to order: -X214, -X21)

・Easy to lock push-lock type
・Larger knob
・Improved tube insertion/removal
　Insertion force: Max. 30% (8 N) reduction
　Removal force: Max. 20% (5 N) reduction*
・Electroless nickel plated type is standard.
・360° swivel piping is possible. (Universal type)

* Tube removal strength is ensured to be equivalent to the previous model.

・The numerical indication of knob rotations for flow rate reduces flow setting time and setting errors.
　The value can be controlled with the indicator window.
・Larger push-lock type knob
・Improved reproducibility of flow rate
・Easier to insert and remove tubes
・Electroless nickel plated type is standard.

・New thread for piping that reduces screw-in time by 1/3 with a gasket seal
・Compatible with Rc, G, NPT, and NPTF

・Enables bi-directional flow control with a speed controller (Meter-in and meter-out)
・Prevents cylinders from lurching
・Speed control of single acting cylinders

・Available with a restrictor (Made to order: -X214, -X21)

・One-touch needle locking