Electronic Pressure Switches/Sensors (Self-contained Type)

・Visualization of settings
・Simple 3-step setting
・Easy screen switching
　It is possible to change the settings while checking the measured value.
・Delay time:1.5 ms or less
・Current consumption: 25 mA or less
・IO-Link compatible

・With one-touch fitting (Straight, Elbow)
・Space-saving, capable of vertical and horizontal contact mounting
・With display calibration function
・Simultaneous copying is possible for maximum 10 units.

∗ The ZSE30A(F)/ISE30A series now features 2 new models:
　the ZSE20(F)/ISE20 and the ZSE20A(F)/ISE20A.

・Able to detect and display pressures of 10 kPa or less
・Can copy to up to 10 switches simultaneously
　Reduced setting time, Minimized risk of setting mistakes
・3-step setting
・With display low-cut function (zero-cut function)
　“0” is displayed within the effective range.

・Low profile 9.8 mm
・Vertical mounting space reduced to approx. 1/2
　(Compared to ZSE/ISE30A series)
・Simultaneous copying is possible for maximum 10 units.
・3-step setting

・It is possible to change the settings while checking the measured value.
・IO-Link
・Angled display
　Good visibility from various mounting positions
・Rotating display
　Display can rotate 336 degrees after installation
・Applicable fluid：Air, Non-corrosive gas, Non-flammable gas (ISE70/71/79S)
　：Liquid or gas that will not corrode materials of parts
　in contact with fluid (ISE7□G)

・Metal body type (Aluminum die-casted)
・IP67
・With M12 connector

∗ The ISE70 series was discontinued in April 2018.
　Please select the ISE70-□-L2 series.
∗ The ISE75 series was discontinued in July 2018.
　Please select the ISE77G series.
∗ The ISE75H series was discontinued in December 2022.
　Please select the ISE78G series.

・Plug-in port for One-touch fittings.
・With LED light.

・Can be integrated with ZM ejector system.

・Can be integrated with a ZX or ZR ejector system
・Comes equipped with a suction filter as standard

・Check at a glance to see if a workpiece is placed or not.
・The clearance distance between the detection surface and the workpiece can be found intuitively.
・Simple setting: Change the settings while checking the displayed value.
・Energy saving: Air consumption reduced by 60%
・Improved drainage resistance: 10 times or more

・Monitoring the placement condition of the workpiece Indicates failure/abnormality
・Double sensor providing improved preventive and predictive maintenance (IoT) based on IO-Link
　Process data provides Displayed value, Outlet pressure, and Supply pressure value.
・NPN/PNP switch function
・3-screen display (Setting)
・Window comparator type
・Zero cut-off range can be changed.

・Modular type mountable
・ARM10/11 series mountable
・Selectable pressure unit
・With anti-chattering function
・Power-saving mode

・A pressure switch function has been added to the gauge with a digital display.