Controllers/Drivers

・The controller is already set with the data of the actuator.
　(The actuator and controller are provided as a set.)
・Easy operation and simple setting: Easy mode, Detail setting: Normal mode
・Teaching box, controller setting software

・EtherCAT, EtherNet/IP™, PROFINET, DeviceNet®,
　IO-Link, and CC-Link compatible
・Two types of operation command:
　Step no. defined operation, Numerical data defined operation
・Transition wiring of communication cables
・Numerical monitoring available
・IO-Link communication can be performed.
・Controller with STO sub-function/JXC□F

・No programming required
　Capable of setting up an electric actuator operation
　without using a PC or teaching box
・Speed/acceleration 16-level adjustment
・Compatible with actuators with locks
・3-level pushing force settings

・Jog operation can be performed using parallel input signals.
　Jog operations that could previously only be performed using
　the button on the front face can now be performed using the ON/OFF
　status of the input signal.
・Application examples
　Optimal for adjusting the feed value using a button operation
　while checking the motion of the actuator

・End to end operation similar to an air cylinder
・Positioning of 2 stroke end points + 12 intermediate points

・A driver that uses pulse signals to allow positioning at any position
　The actuator can be controlled from the customers' positioning unit.
・Return-to-origin command signal
・With force limit function (Pushing force/Gripping force operations are available.)

・Pulse input type motor driver
・Compatible motor capacity: 100 W, 200 W, 400 W
・Compatible encoders:
　Incremental type
　Absolute type
・Servo adjustment using auto gain tuning
・With display setting function
・Positioning by up to 255 point tables

・Position control, speed control, and torque control can be used.
・Control encoder: Absolute 20-bit encoder
　(Resolution: 1048576 p/rev)
・Applicable Fieldbus protocol: MECHATROLINK-Ⅰ, MECHATROLINK-Ⅲ

・Speed tuning control
・Linear/circular interpolation
・Positioning/pushing operation
・Absolute/relative position coordinate instructions
・Step data input (Max. 2048 points)
・Space saving, reduced wiring

・2-point operation is possible without programming! (End to end)
・Reduced setting labor (Only the speed and force need to be set)
・Reduced wiring labor (Only 2 inputs/outputs*)
　*Per axis
・Space saving
　Footprint: Reduced by up to approx.79%

・The LE□ series electric actuators are applicable to Fieldbus protocols.
・Conversion unit for Fieldbus network and LEC serial communication
・2 methods of operation:
　Step data input, numerical data input
・Position, speed, and other values can be checked on the PLC.

・The controller is already set with the data of the actuator.
　 (The actuator and controller are provided as a set.)
・Easy operation and simple setting: Easy mode, Detail setting: Normal mode
・Teaching box, controller setting software